Every Mistake is an Opportunity to Learn Something New

Thursday, December 15, 2011

Nokia Phone Flashing Without a Flash Box



Here is the way that you could Flash your Nokia Phone without a flash box.
Caution!

  • You can flash in this way only BB5 phones and which supports USB Flashing.
  • Strongly advice that DO NOT FLASH BB5 SL3 Phones in this way otherwise it will lead you to a very complex situation.
  • Please use a good condition USB data cable.
  • There is risk of damage your phone if the task would be interrupted by anything.
  • If you are going to flash a dead phone select Dead USB option in JAF. However some BB5 phones are dose not support Dead USB option. 
  • Close all the unnecessary programmers that may cause to interrupt the flashing progress. Nokia suite software should be completely closed. 
  • Nokia cable driver is necessary. You can install it by installing Nokia PC suit that comes with your phone model. But Nokia PC suite should be closed first of all. 
  •  Take your own risk and do this care fully


Navifram is a Nokia BB5 firmware downloader. 
Download link has been mentioned in the bottem

  • All Nokia Software must be closed before you connect the phone to the computer.
  • USE a reliable USB data cable.
  • To load the MCU, PPM and CNT files bubble click on the each tab and give the path to the correct file that you have downloaded.
  • MCU file is the largest file among them. And PPM file can be identify by VOBxxx or extension as .ppm
  • The remaining file should be CNT file
  • MCU is the main Frame
  • PPM is the language package
  • CNT is default costom content such as default ring tones
JAF with P key Download. Navifram get from here Download















  

No comments:

Post a Comment