Every Mistake is an Opportunity to Learn Something New

Wednesday, December 28, 2011

XPERIA X10 Charging parth

In some of not charging problems the reason is the charging path is broken. There is path in every mobile phone that carry electricity from the charger connector port to the charging IC called charging path.  

PPM Flashing With MXBOX

Tuesday, December 27, 2011

Nokia X6 Not Charging Solution

Here is technical tips to solve Nokia X6 not charging problem. First of all make sure the not charging fault in you phone is not because of a software failure . BB5 phones can be have this not charging problem because of EM data damages in PM. EM means Energy Management data which is responsible fore charging 

Micro SD card pin outs



Nokia C1-01

Download Nokia C1-01 Full paths 

Monday, December 26, 2011

Samsung X300 unloking

JAF EEprom Repair

EEPROM (also written E2PROM and pronounced "e-e-prom," "double-e prom," "e-squared," or simply "e-prom") stands for Electrically Erasable Programmable Read-Only Memory and is a type of non-volatile memory used in computers and other electronic devices to store small amounts of data that must be saved when power is removed, e.g., calibration tables or device configuration.

6020 Insert SIM problem Solved

There are a more than one reason that may cause for Insert SIM problem. Replacing the relevant ESD(Glass IC, SIM IC) has been published as the solution in most of mobile phone repairing solution sites rather than tiring to troubleshooting in right path to find where the failer exactly is. 

C6 Firmware on 5800

Before you scroll down to files, here are some rules:

1. Respect the given instructions, otherwise, your phone will be bricked!
2. Do this at your own risk
3. This release is only for Nokia 5800 RM-356
4. Don't Ever use the supplied files with original or previous CFW. This is ONLY compatible with future releases by members/modders that use the same file set
5. If you happen to brick your phone, try to flash using JAF and original Firmware Files, sometimes it could not be fixed without a flashing device. 

Sunday, December 25, 2011

2300 Ant Switch Bypass

Signal failures may occur due to a few reasons. And one of them is GSM antenna switch failure. You can replace a antenna switch with a new one. But in case of they are unavailable in the market there is a way to bypass it. But the worst case is after the bypass the phone will work in only one band. which means that you have to choose a one band and bypass in relevant way.

RM-30 Firmware

RM 242 Firmware

MX BOX is highly recommended for Nokia phone flashing. Always have advanced features other than JAF box , UFS 3 and HWKuFS Micro box


Video Cable Schematic For Nokia 5800

Here is the video cable diagram of 5800, X6 and slimier module. If you have some experience with electronic work you can make thus yourself. 

The procedure of unlocking Nokia BB5 SL3

The procedure of unlocking Nokia BB5 SL3 with MXKEY
MX Box is a powerful tool for unlocking Nokia BB5 SL3 (security Level 3) Mobile Phones.
Here is the Procedure